MOFIN radiator antifreeze M40 – suitable for vehicles requiring a cooling agent according to specification G40.
MOFIN radiator antifreeze M40 is an ethylene glycol-based antifreeze and corrosion protection concentrate for use in engines with or without aluminium alloy.
MOFIN radiator antifreeze M40 protects all modern engines, especially high-performance aluminium engines, against freezing, rust, and overheating.
MOFIN M40 meets the following requirements: VW/Audi/Seat/Skoda/Lamborghini/Bentley/Bugatti TL 774-G Release for MAN 324 type SI-OAT, MB 325.5
Antifreeze up to ca.
- 18° C
- 38° C
MOFIN M40 can be stored for at least 3 years at temperatures up to 30°C in the unopened, airtight packaging.
MOFIN M40 has a safety information sheet according to EC directive 91/155/EWG.
MOFIN radiator antifreeze M40 is a radiator antifreeze concentrate which can be mixed with normal tap water. The concentration of the radiator antifreeze should not be below 35%, since otherwise the corrosion protection additives are too diluted.
Miscibility of MOFIN M40
Since the special advantages of using MOFIN M40 such as improved aluminium protection and long change intervals only work with the exclusive usage of MOFIN M40, mixture with other antifreezes is not recommended.
MOFIN M40 is compatible with conventional silicate-free and silicate containing antifreezes.
MOFIN M40 should be mixed with water* at a concentration of 33 to 50% vol. before being poured into the cooling circuit.
* When preparing the coolant, clean and not overly hard water must be used. The following are not suitable: mine water, seawater, brackish water, salt water and industrial waste water.
The analysis values of the water may not exceed the following limit values:
If the analysis values of the water exceed the acceptable limit values, it should be treated in an appropriate way, e.g. by mixing with soft, distilled or demineralised (FD) water. A high chloride or sulfate content can be reduced easily in this way.